first commit

mpv/script-opts/console.conf

@@ -0,0 +1 @@
+font_size=44

mpv/script-opts/file_browser.conf

@@ -0,0 +1,175 @@
+#######################################################
+# This is the default config file for mpv-file-browser
+# https://github.com/CogentRedTester/mpv-file-browser
+#######################################################
+
+# root directories, separated by commas
+# on linux you will probably want to add `/`,
+# on windows this should be used to add different drive letters
+# Examples:
+# linux:     root=~/,/
+# windows:   root=~/,C:/
+root=~/
+
+# characters to separate root directories, each character works individually
+# this is in case one is using directories with strange names
+root_separators=,;
+
+# number of entries to show on the screen at once
+num_entries=20
+
+# wrap the cursor around the top and bottom of the list
+wrap=no
+
+# only show files compatible with mpv in the browser
+filter_files=yes
+
+# experimental feature that recurses directories concurrently when appending items to the playlist
+# this feature has the potential for massive performance improvements when using addons with asynchronous IO
+concurrent_recursion=no
+
+# maximum number of recursions that can run concurrently
+# if this number is too high it risks overflowing the mpv event queue, which will cause some directories to be dropped entirely
+max_concurrency=16
+
+# enable custom keybinds
+# the keybind json file must go in ~~/script-opts
+custom_keybinds=no
+
+# file-browser only shows files that are compatible with mpv by default
+# adding a file extension to this list will add it to the extension whitelist
+# extensions are separated with the root separators, do not use any spaces
+extension_whitelist=
+
+# add file extensions to this list to disable default filetypes
+# note that this will also override audio/subtitle_extension options below
+extension_blacklist=
+
+# files with these extensions will be added as additional audio tracks for the current file instead of appended to the playlist
+# items on this list are automatically added to the extension whitelist
+audio_extensions=mka,dts,dtshd,dts-hd,truehd,true-hd
+
+# files with these extensions will be added as additional subtitle tracks for the current file instead of appended to the playlist
+# items on this list are automatically added to the extension whitelist
+subtitle_extensions=etf,etf8,utf-8,idx,sub,srt,rt,ssa,ass,mks,vtt,sup,scc,smi,lrc,pgs
+
+# filter directories or files starting with a period like .config
+# for linux systems
+filter_dot_dirs=no
+filter_dot_files=no
+
+# substitude forward slashes for backslashes when appending a local file to the playlist
+# may be useful on windows systems
+substitute_backslash=no
+
+# interpret backslashes `\` in paths as forward slashes `/`
+# this is useful on Windows, which natively uses backslashes.
+# As backslashes are valid filename characters in Unix systems this could
+# cause mangled paths, though such filenames are rare.
+# Use `yes` and `no` to enable/disable. `auto` tries to use the mpv `platform`
+# property (mpv v0.36+) to decide. If the property is unavailable it defaults to `yes`.
+normalise_backslash=auto
+
+# this option reverses the behaviour of the alt+ENTER keybind
+# when disabled the keybind is required to enable autoload for the file
+# when enabled the keybind disables autoload for the file
+autoload=no
+
+# if autoload is triggered by selecting the currently playing file, then
+# the current file will have it's watch-later config saved before being closed and re-opened
+# essentially the current file will not be restarted
+autoload_save_current=yes
+
+# when opening the browser in idle mode prefer the current working directory over the root
+# note that the working directory is set as the 'current' directory regardless, so `home` will
+# move the browser there even if this option is set to false
+default_to_working_directory=no
+
+# when moving up a directory do not stop on empty protocol schemes like `ftp://`
+# e.g. moving up from `ftp://localhost/` will move straight to the root instead of `ftp://`
+skip_protocol_schemes=yes
+
+# map optical device paths to their respective file paths,
+# e.g. mapping bd:// to the value of the bluray-device property
+map_bd_device=yes
+map_dvd_device=yes
+map_cdda_device=yes
+
+# enables addons
+addons=no
+addon_directory=~~/script-modules/file-browser-addons
+
+# directory to load external modules - currently just user-input-module
+module_directory=~~/script-modules
+
+# turn the OSC idle screen off and on when opening and closing the browser
+# this should only be enabled if file-browser is the only thing controlling the idle-screen,
+# if multiple sources attempt to control the idle-screen at the same time it can cause unexpected behaviour.
+toggle_idlescreen=no
+
+# Set the current open status of the browser in the `file_browser/open` field of the `user-data` property.
+# This property is only available in mpv v0.36+.
+set_user_data=yes
+
+# Set the current open status of the browser in the `file_browser-open` field of the `shared-script-properties` property.
+# This property is deprecated. When it is removed in mpv v0.37 file-browser will automatically disable this option.
+set_shared_script_properties=no
+
+####################################
+######### style settings ###########
+####################################
+
+# force file-browser to use a specific text alignment (default: top-left)
+# uses ass tag alignment numbers: https://aegi.vmoe.info/docs/3.0/ASS_Tags/#index23h3
+# set to 0 to use the default mpv osd-align options
+alignment=7
+
+# The format string used for the header. Uses custom-keybind substitution codes to
+# dynamically change the contents of the header. See: docs/custom-keybinds.md#codes
+# e.g. to add file numbers, set this to: {\fnMonospace}[%i/%x]{\fn<font_name_header or blank>} %q\N----------------------------------------------------
+format_string_header=%q\N----------------------------------------------------
+
+# The format strings used for the wrappers. Supports custom-keybind substitution codes, and
+# supports two additional codes: `%<` and `%>` to show the number of items before and after the visible list, respectively.
+# Setting these options to empty strings will disable the wrappers.
+format_string_topwrapper=%< item(s) above\N
+format_string_bottomwrapper=\N%> item(s) remaining
+
+# allows custom icons be set for the folder and cursor
+# the `\h` character is a hard space to add padding
+folder_icon={\p1}m 6.52 0 l 1.63 0 b 0.73 0 0.01 0.73 0.01 1.63 l 0 11.41 b 0 12.32 0.73 13.05 1.63 13.05 l 14.68 13.05 b 15.58 13.05 16.31 12.32 16.31 11.41 l 16.31 3.26 b 16.31 2.36 15.58 1.63 14.68 1.63 l 8.15 1.63{\p0}\h
+cursor_icon={\p1}m 14.11 6.86 l 0.34 0.02 b 0.25 -0.02 0.13 -0 0.06 0.08 b -0.01 0.16 -0.02 0.28 0.04 0.36 l 3.38 5.55 l 3.38 5.55 3.67 6.15 3.81 6.79 3.79 7.45 3.61 8.08 3.39 8.5l 0.04 13.77 b -0.02 13.86 -0.01 13.98 0.06 14.06 b 0.11 14.11 0.17 14.13 0.24 14.13 b 0.27 14.13 0.31 14.13 0.34 14.11 l 14.11 7.28 b 14.2 7.24 14.25 7.16 14.25 7.07 b 14.25 6.98 14.2 6.9 14.11 6.86{\p0}\h
+
+# set the opacity of fonts in hexadecimal from 00 (opaque) to FF (transparent)
+font_opacity_selection_marker=99
+
+# print the header in bold font
+font_bold_header=yes
+
+# scale the size of the browser; 2 would double the size, 0.5 would halve it, etc.
+# the header and wrapper scaling is relative to the base scaling
+scaling_factor_base=1
+scaling_factor_header=1.4
+scaling_factor_wrappers=0.64
+
+# set custom font names, blank is the default
+# setting custom fonts for the folder/cursor can fix broken or missing icons
+font_name_header=
+font_name_body=
+font_name_wrappers=
+font_name_folder=
+font_name_cursor=
+
+# set custom font colours
+# colours are in hexadecimal format in Blue Green Red order
+# note that this is the opposite order to most RGB colour codes
+font_colour_header=00ccff
+font_colour_body=ffffff
+font_colour_wrappers=00ccff
+font_colour_cursor=00ccff
+
+# these are colours applied to list items in different states
+font_colour_selected=fce788
+font_colour_multiselect=fcad88
+font_colour_playing=33ff66
+font_colour_playing_multiselected=22b547

mpv/script-opts/mpv_thumbnail_script.conf

@@ -0,0 +1,49 @@
+# Automatically generate the thumbnails on video load, without a keypress
+autogenerate=no
+
+# 1 hour, Only automatically thumbnail videos shorter than this (seconds)
+autogenerate_max_duration=3600
+
+# SHA1-sum filenames over this length
+# It's nice to know what files the thumbnails are (hence directory names)
+# but long URLs may approach filesystem limits.
+hash_filename_length=128
+
+# Use mpv to generate thumbnail even if ffmpeg is found in PATH
+# ffmpeg does not handle ordered chapters (MKVs which rely on other MKVs)!
+# mpv is a bit slower, but has better support overall (eg. subtitles in the previews)
+prefer_mpv=yes
+
+# Disable the built-in keybind ("T") to add your own
+disable_keybinds=no
+
+# The thumbnail count target
+# (This will result in a thumbnail every ~10 seconds for a 25 minute video)
+thumbnail_count=150
+
+# The above target count will be adjusted by the minimum and
+# maximum time difference between thumbnails.
+# The thumbnail_count will be used to calculate a target separation,
+# and min/max_delta will be used to constrict it.
+
+# In other words, thumbnails will be:
+#   at least min_delta seconds apart (limiting the amount)
+#   at most max_delta seconds apart (raising the amount if needed)
+min_delta=5
+# 120 seconds aka 2 minutes will add more thumbnails when the video is over 5 hours!
+max_delta=90
+
+
+# Overrides for remote urls (you generally want less thumbnails!)
+# Thumbnailing network paths will be done with mpv
+
+# Allow thumbnailing network paths (naive check for "://")
+thumbnail_network=no
+# Override thumbnail count, min/max delta
+remote_thumbnail_count=60
+remote_min_delta=15
+remote_max_delta=120
+
+# Try to grab the raw stream and disable ytdl for the mpv subcalls
+# Much faster than passing the url to ytdl again, but may cause problems with some sites
+remote_direct_stream=yes

mpv/script-opts/osc.conf

@@ -0,0 +1,22 @@
+# Timestamp
+# Display total time instead of remaining time
+timetotal=yes
+# Display timecodes with milliseconds
+timems=no
+
+# Whether to display the chapters/playlist at the OSD when left-clicking the next/previous OSC buttons, respectively.
+playlist_osd=yes
+chapters_osd=yes
+
+# Duration of fade out in ms, 0 = no fade
+fadeduration=200
+
+# Minimum amount of pixels the mouse has to move between ticks to make the OSC show up. Default pre-0.21.0 was 3.
+minmousemove=0
+
+# auto=hide/show on mouse move
+# Also supports never and always
+visibility=auto
+
+# Use a Unicode minus sign instead of an ASCII hyphen when displaying the remaining playback time.
+unicodeminus=no

mpv/script-opts/playlistmanager.conf

@@ -0,0 +1,169 @@
+#### ------- Mpv-Playlistmanager configuration ------- ####
+
+#navigation keybindings force override only while playlist is visible
+#if "no" then you can display the playlist by any of the navigation keys
+dynamic_binds=yes
+
+# To bind multiple keys separate them by a space
+
+# main key to show playlist
+key_showplaylist=SHIFT+ENTER
+
+# display playlist while key is held down
+key_peek_at_playlist=
+
+# dynamic keys
+key_moveup=UP
+key_movedown=DOWN
+key_movepageup=PGUP
+key_movepagedown=PGDWN
+key_movebegin=HOME
+key_moveend=END
+key_selectfile=RIGHT LEFT
+key_unselectfile=
+key_playfile=ENTER
+key_removefile=BS
+key_closeplaylist=ESC SHIFT+ENTER
+
+# extra functionality keys
+key_sortplaylist=
+key_shuffleplaylist=
+key_reverseplaylist=
+key_loadfiles=
+key_saveplaylist=
+
+#json format for replacing, check .lua for explanation
+#example json=[{"ext":{"all":true},"rules":[{"_":" "}]},{"ext":{"mp4":true,"mkv":true},"rules":[{"^(.+)%..+$":"%1"},{"%s*[%[%(].-[%]%)]%s*":""},{"(%w)%.(%w)":"%1 %2"}]},{"protocol":{"http":true,"https":true},"rules":[{"^%a+://w*%.?":""}]}]
+#empty for no replace
+filename_replace=[{"protocol":{"all":true},"rules":[{"%%(%x%x)":"hex_to_char"}]}]
+
+#filetypes to search from directory
+loadfiles_filetypes=["jpg","jpeg","png","tif","tiff","gif","webp","svg","bmp","mp3","wav","ogm","flac","m4a","wma","ogg","opus","mkv","avi","mp4","ogv","webm","rmvb","flv","wmv","mpeg","mpg","m4v","3gp"]
+
+#loadfiles at startup if 1 or more items in playlist
+loadfiles_on_start=no
+#loadfiles from working directory on idle startup
+loadfiles_on_idle_start=no
+#always put loaded files after currently playing file
+loadfiles_always_append=no
+
+#sort playlist when any files are added to playlist after initial load
+sortplaylist_on_file_add=no
+
+#default sorting method, must be one of: "name-asc", "name-desc", "date-asc", "date-desc", "size-asc", "size-desc".
+default_sort=name-asc
+
+#linux | windows | auto
+system=auto
+
+#Use ~ for home directory. Leave as empty to use mpv/playlists
+playlist_savepath=
+
+#constant filename to save playlist as. Note that it will override existing playlist. Leave empty for generated name.
+playlist_save_filename=
+
+#save playlist automatically after current file was unloaded
+save_playlist_on_file_end=no
+
+#show file title every time a new file is loaded
+show_title_on_file_load=no
+#show playlist every time a new file is loaded
+show_playlist_on_file_load=no
+#close playlist when selecting file to play
+close_playlist_on_playfile=no
+
+#sync cursor when file is loaded from outside reasons(file-ending, playlist-next shortcut etc.)
+sync_cursor_on_load=yes
+
+#allow the playlist cursor to loop from end to start and vice versa
+loop_cursor=yes
+
+#allow playlistmanager to write watch later config when navigating between files
+allow_write_watch_later_config=yes
+
+#reset cursor navigation when closing or opening playlist
+reset_cursor_on_close=yes
+reset_cursor_on_open=yes
+
+#prefer to display titles for following files: "all", "url", "none". Sorting still uses filename
+prefer_titles=url
+
+#youtube-dl executable for title resolving if enabled, probably "youtube-dl" or "yt-dlp", can be absolute path
+youtube_dl_executable=yt-dlp
+
+#call youtube-dl to resolve the titles of urls in the playlist
+#if yes, prefer_titles must be set to "url" or "all" for this to work
+resolve_url_titles=no
+
+#call ffprobe to resolve the titles of local files in the playlist (if they exist in the metadata)
+#if yes, prefer_titles must be set to "all" for this to work
+resolve_local_titles=no
+
+#timeout in seconds for url title resolving
+resolve_title_timeout=15
+
+#how many url titles can be resolved at a time. Higher number might lead to stutters.
+concurrent_title_resolve_limit=10
+
+#osd timeout on inactivity in seconds, use 0 for no timeout
+playlist_display_timeout=0
+
+#when peeking at playlist, show playlist at the very least for display timeout
+peek_respect_display_timeout=no
+
+#the maximum amount of lines playlist will render. -1 will automatically calculate lines.
+showamount=-1
+
+#playlist ass style overrides
+#example {\q2\an7\fnUbuntu\fs10\b0\bord1} equals: line-wrap=no, align=top left, font=Ubuntu, size=10, bold=no, border=1
+#read http://docs.aegisub.org/3.2/ASS_Tags/ for reference of tags
+#undeclared tags will use default osd settings
+#these styles will be used for the whole playlist
+#\q2 style is recommended since filename wrapping may lead to unexpected rendering
+#\an7 style is recommended to align to top left, otherwise osd-align-x/y is respected
+style_ass_tags={\q2\an7}
+#paddings for left right and top bottom
+text_padding_x=30
+text_padding_y=60
+
+#screen dim when menu is open 0.0 - 1.0 (0 is no dim, 1 is black)
+curtain_opacity=0.7
+
+#set title of window with stripped name
+set_title_stripped=no
+title_prefix=
+title_suffix= - mpv
+
+#slice long filenames, and how many chars to show
+slice_longfilenames=no
+slice_longfilenames_amount=70
+
+#Playing header. One newline will be added after the string.
+#%mediatitle or %filename = title or name of playing file
+#%pos = position of playing file
+#%cursor = position of navigation
+#%plen = playlist lenght
+#%N = newline
+playlist_header=[%cursor/%plen]
+
+#Playlist file templates
+#%pos = position of file with leading zeros
+#%name = title or name of file
+#%N = newline
+#you can also use the ass tags mentioned above. For example:
+#  selected_file={\c&HFF00FF&}➔ %name   | to add a color for selected file. However, if you
+#  use ass tags you need to reset them for every line (see https://github.com/jonniek/mpv-playlistmanager/issues/20)
+normal_file={\c&HEEECE8&}○ %name
+hovered_file={\c&H33FFFF&}● %name
+selected_file={\c&HFF00FF&}➔ %name
+playing_file={\c&H91ff4c&}▷ %name
+playing_hovered_file={\c&H00FF00&}▶ %name
+playing_selected_file={\c&Hff9ad3&}➤ %name
+
+#what to show when playlist is truncated
+playlist_sliced_prefix=...
+playlist_sliced_suffix=...
+
+#output visual feedback to OSD when saving, shuffling, reversing playlists
+display_osd_feedback=yes
+

mpv/script-opts/tethys.conf

@@ -0,0 +1,54 @@
+### Config
+showPictureInPictureButton=yes
+showSpeedButton=yes
+# Show name and shortcut of buttons on hover
+showShortcutTooltip=yes
+# Show chapter above timestamp in seekbar tooltip
+showChapterTooltip=yes
+# skipback/skipfrwd amount in seconds
+skipBy=5
+# RightClick skipback/skipfrwd amount in seconds
+skipByMore=30
+# "exact" (mordenx default) or "relative+keyframes" (mpv default)
+skipMode=exact
+# PictureInPicture 33% screen width, 10px from bottom right
+pipGeometry=33%+-10+-10
+# PictureInPicture will show video on all virtual desktops
+pipAllWorkspaces=yes
+
+### Sizes
+# 16:9 video thumbnail = 256x144
+thumbnailSize=256
+seekbarHeight=20
+controlsHeight=64
+buttonTooltipSize=20
+windowBarHeight=44
+windowButtonSize=44
+windowTitleSize=24
+cacheTextSize=20
+timecodeSize=27
+seekbarTimestampSize=30
+seekbarTimestampOutline=1
+chapterTickSize=6
+windowTitleOutline=1
+
+### Colors (uses GGBBRR for some reason)
+### Alpha ranges 0 (opaque) .. 255 (transparent)
+textColor=FFFFFF
+buttonColor=CCCCCC
+buttonHoveredColor=FFFFFF
+buttonHoveredRectColor=000000
+# Easily debug button geometry by setting buttonHoveredRectAlpha to 80
+buttonHoveredRectAlpha=255
+tooltipColor=CCCCCC
+windowBarColor=000000
+# windowBarAlpha (80 is mpv default) (255 morden default)
+windowBarAlpha=255
+windowButtonColor=CCCCCC
+closeButtonHoveredColor=1111DD
+seekbarHandleColor=FFFFFF
+seekbarFgColor=483DD7
+seekbarBgColor=929292
+seekbarCacheColor=000000
+seekbarCacheAlpha=128
+chapterTickColor=CCCCCC