various

config-stow

@@ -69,7 +69,7 @@ def stow(pkg: str):
 
 
 def switch(session: str):
-    subprocess.run(["~/.local/scripts/config-switch", session], check=True)
+    subprocess.run([str(Path("~/.local/scripts/config-switch").expanduser()), session], check=True)
 
 
 def main():

config/misc/.config/MangoHud/MangoHud.conf

@@ -0,0 +1,383 @@
+### MangoHud configuration file
+### Uncomment any options you wish to enable. Default options are left uncommented
+### Use some_parameter=0 to disable a parameter (only works with on/off parameters)
+### Everything below can be used / overridden with the environment variable MANGOHUD_CONFIG instead
+
+################ INFORMATIONAL #################
+## prints possible options on stdout
+# help
+
+################ PERFORMANCE #################
+
+### Limit the application FPS. Comma-separated list of one or more FPS values (e.g. 0,30,60). 0 means unlimited (unless VSynced)
+# fps_limit=0
+
+### early = wait before present, late = wait after present
+# fps_limit_method=
+
+### VSync [0-3] 0 = adaptive; 1 = off; 2 = mailbox; 3 = on
+# vsync=-1
+
+### OpenGL VSync [0-N] 0 = off; >=1 = wait for N v-blanks, N > 1 acts as a FPS limiter (FPS = display refresh rate / N)
+# gl_vsync=-2
+
+### Mip-map LoD bias. Negative values will increase texture sharpness (and aliasing)
+## Positive values will increase texture blurriness (-16 to 16)
+# picmip=-17
+
+### Anisotropic filtering level. Improves sharpness of textures viewed at an angle (0 to 16)
+# af=-1
+
+### Force bicubic filtering
+# bicubic
+
+### Force trilinear filtering
+# trilinear
+
+### Disable linear texture filtering. Makes textures look blocky
+# retro
+
+################### VISUAL ###################
+
+### Legacy layout
+# legacy_layout=0
+
+### pre defined presets
+# -1 = default
+#  0 = no display
+#  1 = fps only
+#  2 = horizontal view
+#  3 = extended
+#  4 = high detailed information
+# preset=-1
+
+### Enable most of the toggleable parameters (currently excludes `histogram`)
+# full
+
+### Show FPS only. ***Not meant to be used with other display params***
+# fps_only
+
+### Display custom centered text, useful for a header
+# custom_text_center=
+
+### Display the current system time
+# time
+## removes the time label
+# time_no_label
+
+### Time formatting examples
+## %H:%M
+## [ %T %F ]
+## %X # locally formatted time, because of limited glyph range, missing characters may show as '?' (e.g. Japanese)
+# time_format="%T"
+
+### Display MangoHud version
+# version
+
+### Display the current GPU information
+## Note: gpu_mem_clock and gpu_mem_temp also need "vram" to be enabled
+gpu_stats
+# gpu_temp
+# gpu_junction_temp
+# gpu_core_clock
+# gpu_mem_temp
+# gpu_mem_clock
+gpu_power
+gpu_text=GPU0-I,GPU1-D
+gpu_load_change
+gpu_load_value=60,90
+gpu_load_color=39F900,FDFD09,FF0000
+## GPU fan in rpm on AMD, FAN in percent on NVIDIA
+# gpu_fan
+## gpu_voltage only works on AMD GPUs
+# gpu_voltage
+## Select list of GPUs to display
+# gpu_list=0,1
+
+### Display the current CPU information
+cpu_stats
+# cpu_temp
+cpu_power
+# cpu_text=
+# cpu_mhz
+cpu_load_change
+cpu_load_value=60,90
+cpu_load_color=39F900,FDFD09,FF0000
+
+### Display the current CPU load & frequency for each core
+# core_load
+# core_load_change
+# core_bars
+
+### Display IO read and write for the app (not system)
+# io_read
+# io_write
+
+### Display system vram / ram / swap space usage
+# vram
+# ram
+# swap
+
+### Display per process memory usage
+## Show resident memory and other types, if enabled
+procmem
+# procmem_shared
+# procmem_virt
+
+### Display battery information
+# battery
+# battery_icon
+# device_battery=gamepad,mouse
+# device_battery_icon
+# battery_watt
+# battery_time
+
+### Display FPS and frametime
+fps
+# fps_sampling_period=500
+fps_color_change
+fps_value=30,60
+fps_color=B22222,FDFD09,39F900
+# fps_text=""
+frametime
+# frame_count
+## fps_metrics takes a list of decimal values or the value avg
+# fps_metrics=0.01,0.001
+fps_metrics=avg,0.01,0.001
+
+### Display GPU throttling status based on Power, current, temp or "other"
+## Only shows if throttling is currently happening
+# throttling_status
+## Same as throttling_status but displays throttling on the frametime graph
+# throttling_status_graph
+
+### Display miscellaneous information
+# engine_version
+# engine_short_names
+# gpu_name
+# vulkan_driver
+# wine
+# exec_name
+# winesync
+# present_mode
+
+### Display loaded MangoHud architecture
+# arch
+
+### Display the frametime line graph
+frame_timing
+# frame_timing_detailed
+# dynamic_frame_timing
+# histogram
+
+### Display GameMode / vkBasalt running status
+# gamemode
+# vkbasalt
+
+### Gamescope related options
+## Display the status of FSR (only works in gamescope)
+# fsr
+## Hides the sharpness info for the `fsr` option (only available in gamescope)
+# hide_fsr_sharpness
+## Shows the graph of gamescope app frametimes and latency (only on gamescope obviously)
+# debug
+## Display the status of HDR (only works in gamescope)
+# hdr
+## Display the current refresh rate (only works in gamescope)
+# refresh_rate
+
+
+### graphs displays one or more graphs that you chose
+## separated by ",", available graphs are
+## gpu_load,cpu_load,gpu_core_clock,gpu_mem_clock,vram,ram,cpu_temp,gpu_temp
+# graphs=
+
+### mangoapp related options
+## Enables mangoapp to be displayed above the Steam UI
+# mangoapp_steam
+
+### Steam Deck options
+## Shows the Steam Deck fan rpm
+# fan
+
+### Display current FPS limit
+# show_fps_limit
+
+### Display the current resolution
+# resolution
+
+### Display current display session
+# display_server
+
+### Display temperature in fahrenheit
+# temp_fahrenheit
+
+### Display custom text
+# custom_text=
+### Display output of Bash command in next column
+# exec=
+
+### Display media player metadata
+# media_player
+## for example spotify
+# media_player_name=
+## Format metadata, lines are delimited by ; (wip)
+## example: {title};{artist};{album}
+## example: Track:;{title};By:;{artist};From:;{album}
+# media_player_format=title,artist,album
+
+### Network interface throughput
+# network
+## Network can take arguments but it's not required.
+## without arguments it shows all interfaces
+## arguments set which interfaces will be displayed
+# network=eth0,wlo1
+
+
+### Change the hud font size
+# font_size=24
+# font_scale=1.0
+# font_size_text=24
+# font_scale_media_player=0.55
+# no_small_font
+
+### Change default font (set location to TTF/OTF file)
+## Set font for the whole hud
+# font_file=
+
+## Set font only for text like media player metadata
+# font_file_text=
+
+## Set font glyph ranges. Defaults to Latin-only. Don't forget to set font_file/font_file_text to font that supports these
+## Probably don't enable all at once because of memory usage and hardware limits concerns
+## If you experience crashes or text is just squares, reduce glyph range or reduce font size
+# font_glyph_ranges=korean,chinese,chinese_simplified,japanese,cyrillic,thai,vietnamese,latin_ext_a,latin_ext_b
+
+### Outline text
+text_outline
+# text_outline_color = 000000
+# text_outline_thickness = 1.5
+
+### Change the hud position
+# position=top-left
+
+### Change the corner roundness
+# round_corners=0
+
+### Remove margins around MangoHud
+# hud_no_margin
+
+### Display compact version of MangoHud
+# hud_compact
+
+### Display MangoHud in a horizontal position
+# horizontal
+# horizontal_stretch
+
+### Disable / hide the hud by default
+# no_display
+
+### Show FEX-Emu statistics
+## Only useful for Arm64 devices running applications under emulation
+# fex_stats
+
+### Hud position offset
+# offset_x=0
+# offset_y=0
+
+### Hud dimensions
+# width=0
+# height=140
+# table_columns=3
+# cellpadding_y=-0.085
+
+### Hud transparency / alpha
+# background_alpha=0.5
+# alpha=1.0
+
+### FCAT overlay
+### This enables an FCAT overlay to perform frametime analysis on the final image stream.
+### Enable the overlay
+# fcat
+### Set the width of the FCAT overlay.
+### 24 is a performance optimization on AMD GPUs that should not have adverse effects on nVidia GPUs.
+### A minimum of 20 pixels is recommended by nVidia.
+# fcat_overlay_width=24
+### Set the screen edge, this can be useful for special displays that don't update from top edge to bottom. This goes from 0 (left side) to 3 (top edge), counter-clockwise.
+# fcat_screen_edge=0
+
+### Color customization
+# text_color=FFFFFF
+# gpu_color=2E9762
+# cpu_color=2E97CB
+# vram_color=AD64C1
+# ram_color=C26693
+# engine_color=EB5B5B
+# io_color=A491D3
+# frametime_color=00FF00
+# background_color=020202
+# media_player_color=FFFFFF
+# wine_color=EB5B5B
+# battery_color=FF9078
+# network_color=E07B85
+
+### Specify GPU with PCI bus ID
+### Set to 'domain:bus:slot.function'
+### Example:
+###     $ lspci | grep A770
+###     03:00.0 VGA compatible controller: Intel Corporation DG2 [Arc A770] (rev 08)
+# pci_dev=0000:03:00.0
+
+### Blacklist
+# blacklist=
+
+### Control over socket
+### Enable and set socket name, '%p' is replaced with process id
+## example: mangohud
+## example: mangohud-%p
+# control = -1
+
+################ WORKAROUNDS #################
+### Options starting with "gl_*" are for OpenGL
+### Specify what to use for getting display size. Options are "viewport", "scissorbox" or disabled. Defaults to using glXQueryDrawable
+# gl_size_query=viewport
+
+### (Re)bind given framebuffer before MangoHud gets drawn. Helps with Crusader Kings III
+# gl_bind_framebuffer=0
+
+### Don't swap origin if using GL_UPPER_LEFT. Helps with Ryujinx
+# gl_dont_flip=1
+
+################ INTERACTION #################
+
+### Change toggle keybinds for the hud & logging
+# toggle_hud=Shift_R+F12
+# toggle_hud_position=Shift_R+F11
+# toggle_preset=Shift_R+F10
+# toggle_fps_limit=Shift_L+F1
+# toggle_logging=Shift_L+F2
+# reload_cfg=Shift_L+F4
+# upload_log=Shift_L+F3
+# reset_fps_metrics=Shift_R+f9
+
+#################### LOG #####################
+### Automatically start the log after X seconds
+# autostart_log=
+### Set amount of time in seconds that the logging will run for
+# log_duration=
+### Change the default log interval, 0 is default
+# log_interval=0
+### Set location of the output files (required for logging)
+# output_folder=/home/<USERNAME>/mangologs
+### Permit uploading logs directly to FlightlessMango.com
+## set to 1 to enable
+# permit_upload=0
+### Define a '+'-separated list of percentiles shown in the benchmark results
+### Use "AVG" to get a mean average. Default percentiles are 97+AVG+1+0.1
+## example: ['97', 'AVG', '1', '0.1']
+# benchmark_percentiles=97,AVG
+## Adds more headers and information such as versioning to the log. This format is not supported on flightlessmango.com (yet)
+# log_versioning
+## Enable automatic uploads of logs to flightlessmango.com
+# upload_logs
+# output_file=""

config/niri/.config/niri/config.kdl

@@ -46,9 +46,6 @@ output "eDP-2" {
     backdrop-color "#1e1e2e"
 }
 
-output "HDMI-A-1" {
-}
-
 
 /************************Layout************************/
 
@@ -169,7 +166,7 @@ environment {
     // Themes
     QT_QPA_PLATFORM "wayland"
     QT_QPA_PLATFORMTHEME "kde"
-    QT_STYLE_OVERRIDE "Breeze"
+    QT_STYLE_OVERRIDE "Kvantum"
 
     // Nvidia
     LIBVA_DRIVER_NAME "nvidia"
@@ -263,6 +260,15 @@ window-rule {
     open-on-workspace "second"
 }
 
+window-rule {
+    match app-id="at.yrlf.wl_mirror"
+
+    // default-column-width { proportion 1.0; }
+    open-floating true
+    // open-maximized-to-edges true
+    // open-on-output "HDMI-A-1"
+}
+
 // I love round corners
 window-rule {
     geometry-corner-radius 14
@@ -303,8 +309,8 @@ binds {
     Mod+Return { spawn "kitty"; }
     Mod+Shift+T { spawn "ghostty"; }
     Mod+Shift+Return { spawn "ghostty"; }
-    Mod+Shift+W { spawn-sh "QT_STYLE_OVERRIDE=Kvantum wallpaper-carousel"; }
+    Mod+Shift+W { spawn-sh "wallpaper-carousel"; }
-    Mod+P { spawn-sh "pkill -x -n pwvucontrol || pwvucontrol"; }
+    Mod+O { spawn-sh "pkill -x -n pwvucontrol || pwvucontrol"; }
     Mod+Shift+E { spawn "sunset"; }
 
     // Quickshell
@@ -444,4 +450,6 @@ binds {
     Mod+M allow-inhibiting=false { quit; }
 
     Mod+Shift+P { spawn-sh "(hyprlock &) && niri msg action power-off-monitors"; }
+
+    Mod+P repeat=false { spawn-sh "wl-mirror $(niri msg --json focused-output | jq -r .name)"; }
 }

config/quickshell/.config/quickshell/Modules/Bar/Components/CavaBar.qml

@@ -11,6 +11,7 @@ Item {
     property int count: 6
     property int barWidth: 5
     property int barSpacing: 3
+    property bool forceEnable: false
 
     implicitWidth: root.barWidth * root.count + root.barSpacing * (root.count - 1)
     implicitHeight: parent.height - 10
@@ -19,6 +20,7 @@ Item {
         id: cavaProcess
 
         count: root.count
+        forceEnable: root.forceEnable
     }
 
     RowLayout {
@@ -55,12 +57,14 @@ Item {
         anchors.fill: parent
         hoverEnabled: true
         cursorShape: Qt.PointingHandCursor
-        acceptedButtons: Qt.LeftButton | Qt.RightButton
+        acceptedButtons: Qt.LeftButton | Qt.RightButton | Qt.MiddleButton
         onClicked: (mouse) => {
             if (mouse.button === Qt.LeftButton)
                 MusicManager.playPause();
             else if (mouse.button === Qt.RightButton)
                 SettingsService.showLyricsBar = !SettingsService.showLyricsBar;
+            else if (mouse.button === Qt.MiddleButton)
+                root.forceEnable = !root.forceEnable;
         }
         onWheel: function(wheel) {
             if (wheel.angleDelta.y > 0)

config/quickshell/.config/quickshell/Utils/Cava.qml

@@ -31,12 +31,13 @@ Scope {
         }
     })
     property var values: Array(count).fill(0)
+    property bool forceEnable: false
 
     Process {
         id: process
 
         stdinEnabled: true
-        running: !MusicManager.isAllPaused()
+        running: root.forceEnable || !MusicManager.isAllPaused()
         command: ["cava", "-p", "/dev/stdin"]
         onExited: {
             stdinEnabled = true;

config/scripts/.local/scripts/change-colortheme

@@ -47,7 +47,7 @@ SCRIPTS = {
     "quickshell": [CONFIG_DIR / "quickshell" / "apply-color"],
     "rofi": [CONFIG_DIR / "rofi" / "apply-color"],
     "waybar": [CONFIG_DIR / "waybar" / "apply-color"],
-    "wlogout": [CONFIG_DIR / "wlogout" / "apply-color", CONFIG_DIR / "wlogout-niri" / "apply-color"],
+    "wlogout": [CONFIG_DIR / ".alt" / "wlogout-default" / "apply-color", CONFIG_DIR / ".alt" / "wlogout-niri" / "apply-color"],
     "yazi": [CONFIG_DIR / "yazi" / "apply-color"],
 }
 # or simply `find ${CONFIG_DIR} -type f -iname 'apply-color*'` to get all available scripts,

memo/dolphin-foreground.md

@@ -1,14 +1,14 @@
-不在 KDE 中运行 Dolphin 时前景色可能会很奇怪，在 .config/dolphinrc 中指定颜色主题可以解决：
+不在 Plasma 中运行 Dolphin 时前景色可能会很奇怪，在 .config/dolphinrc 中指定颜色主题可以解决：
 
 ```conf
-[UiSettigs]
+[UiSettings]
 ColorScheme=<name>
 ```
 
 例如<s>大家都喜欢的</s>猫布奇-抹茶-蓝
 
 ```conf
-[UiSettigs]
+[UiSettings]
 ColorScheme=Catppuccin Mocha Blue
 ```
 

memo/fish-keybindings.txt

@@ -9,6 +9,4 @@ A b         单词后移
 C u         从光标位置到行首删除
 C k         从光标位置到行末删除
 
-A c         大小写切换
-
 A s         sudo

memo/tailscale-nfs.txt

@@ -23,6 +23,7 @@ NFS 允许将文件系统挂载到远程主机上。
 安装后：
     1) 服务端：
         a）echo "/path/to/share *(rw,no_subtree_check,async)" | sudo tee -a /etc/exports
+            或更精确的权限控制
         b) systemctl 启动 nfs-server 服务
     2) 客户端
         a) sudo mount -t nfs -o vers=4,noatime,async 100.x.y.z:/path/to/share /path/to/mount